FLEXi SP3 is a hybrid security control panel with on-board WiFi and Cellular or Ethernet connectivity.
Unique feature set allows you to use this panel both in intrusion alarm and automation installations.
Power supply: 16-24 V, 2,5 A AC
Current consumption: Up to 50 mA (stand-by), Up to 200 mA (short-term, while sending)
WiFi frequency, protocol, encryption: 2,4 GHz, 802.11 b/g/n, WPA, WPA2, WPA mixed
WiFi network configuration: DHCP or manual
SIM card: 1, NANO size
GSM/GPRS modem: Quad-band 4G modem 4G (LTE-FDD) with migration to 3G (WCDMA) and 2G (GSM/EDGE) feature
Ethernet port: RJ-45 connector
Event transmission directions
– To main and backup receivers of 2 different security companies;
– iOS/Android
– To 8 mobile phones via SMS messages.
– Calls to 8 mobile phones. Vocal event notification
Event transmission channels: 2G or 4G, WiFi, LAN (with module E485), SMS, Voice call, VHF/UHF radio (with transmitter T16)
Programmable communication: channel/direction priority Yes Message encryption TRK AES 128, SIA IP AES 128 / Contact ID codes
Internal clock: Yes
Events log memory: 1000 entries, oldest deleted automatically
User codes: 40
Duress code: Yes
No. of partitions: 8
No. of zones: 10 (20 if set ATZ), expandable up to 64
No. of PGM outputs: 2 (12 if IO terminals are set as OUT) Expandable to 16 with expanders
No. of keypads: 8
No. of RFID readers: 2 (Wiegand 26/34)
No. of compatible temperature sensors: 8
No. of compatible electronic (iButton) keys: 40
Compatible wireless systems: M4, S8, via extra add-on RF module
(Honeywell, Paradox)*
Operating environment: Temperature from -10 °C to +50 °C, relative humidity 80%, at +20 °C, no condensation
