Intrusion Alarm Access Control Module ACM12

The PDX-ACM12 provides the EVO system with sophisticated access control features including access schedules, Door Open too long, Door forced alarms and compatibility with Paradox 4 wire readers or industry standard wiegand readers

The Access Control Module (ACM12) is designed to be used with the Digiplex EVO System control panels. Each ACM12 allows you to connect a reader, a REX device, a door contact and a locking device to control the access to one door. If desired, door contacts can also be assigned to zones in the control panel to link the doors to the alarm system. This will allow you to use the same door for the access control system and the alarm system.

• Support for six additional schedule intervals for Door Unlock Schedule.
• Added security when disarming your system. New option to disarm with access card and PIN code.

Code: ACM12

Category: Intrusion Alarm System

Description:
Paradox ACM12. 4-Wire Access Control Module:
– Transformer Sharing: Use one transformer to power multiple modules that have this feature
– Grant access via card and/or panel access code with the R915
– Arm with card and pin with the R915
– Connections for 1 door (card reader, REX, door contact and lock output)
– Connect only 4 wires between the reader and ACM12 module when using a R910 or a R915 reader
– In-field firmware upgradeable via CONV4USB and WinLoad
– Automatic unlocking schedule
– Door Left Open and Door Forced Open options
– Door unlock and extended delay timers
– Unlock door manually with button or PGM event
– Unlock Door On Fire Alarm option
– Safe Mode option (during a communication loss, the access control door connected to the module can grant access to up to 4 specified cards or any valid access card)
– Built-in supervised 1.5A switching power supply
– Push button to activate or deactivate the Auxiliary output
– Supports 4-wire and 26-bit Wiegand card readers
– Fits in a 20cm x 25.5cm x 7.6cm (8in x 10in x 3in) metal box
– PAR-67