The Resettable Emergency Door Release by Elock is a manual safety switch for electronic door access control systems. It allows users to activate a connected emergency door release circuit. As a result, authorized emergency exit procedures can operate without breaking a glass element.
The Elock EM201 uses a reusable operating mechanism. In addition, its double-pole contacts provide flexible wiring options for compatible door access systems.
3S Security Solutions Specialists Inc. supplies Elock emergency door release switches in the Philippines for commercial and industrial security installations.
First, a user activates the emergency release switch when an emergency requires door unlocking.
Next, the switch changes the state of its electrical contacts. The connected door access system then responds according to its wiring and configuration.
For example, a properly designed fail-safe electromagnetic lock circuit may release the door when the switch operates.
After the incident, authorized personnel inspect the system and use the specified reset tool to restore the switch.
Therefore, the device can be reused without replacing a broken glass element.
However, the actual door release function depends on the installed access control circuit. Qualified installers must follow the approved door safety design.
The Resettable Emergency Door Release is suitable for controlled entrances where manual emergency unlocking is required.
Before installation, contractors should assess door hardware, access control wiring, and applicable building safety requirements.
A traditional break glass switch uses a replaceable glass element. Once activated, the broken element may need replacement.
In contrast, the Elock EM201 uses a resettable mechanism. Maintenance personnel can restore the switch with the appropriate tool.
As a result, the resettable design can reduce replacement materials during testing and maintenance.
However, neither design should be assumed suitable for every emergency exit application. Product selection depends on the building’s approved safety requirements.
The Elock EM201 can be integrated with compatible door access control equipment.
For example, installers may connect the switch to a suitable electromagnetic lock release circuit. The DPDT contacts also allow different wiring arrangements, depending on the system design.
Explore our Door Locks & Accessories for related locking equipment.
You can also browse our Push to Exit Buttons and Security Access Control products.
3S Security Solutions Specialists Inc. supplies Elock door access components and emergency release equipment nationwide.
We assist security installers, contractors, resellers, and system integrators with product information and project quotations. In addition, our team supports technical inquiries and equipment selection.
For product information, visit the official Elock EM201 manufacturer page.
Need a Resettable Emergency Door Release? Request a quotation from 3S Security PH.
A resettable emergency door release is a manual switch used in compatible electronic door locking systems. It allows an emergency release action without breaking a glass element.
After activation, authorized personnel use the specified reset tool. They should also confirm that the door locking system operates correctly before returning it to service.
Yes, when the electrical contacts and circuit design are compatible. However, installers must check the lock’s power requirements and approved release arrangement.
No. Its resettable mechanism does not require breakable glass. Therefore, routine testing can avoid the need for replacement glass elements.
No. An emergency door release is designed for door unlocking circuits. A fire alarm manual call point is intended to activate a compatible fire alarm system.
The manufacturer’s documentation identifies indoor applications and environmental limits. Therefore, exposed outdoor installation should not be assumed suitable.
3S Security Solutions Specialists Inc. supplies Elock emergency door release switches and related access control equipment. Contractors and integrators can request technical details and quotations.